CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Gambit Size functions issue

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 13, 2006, 11:20
Default Gambit Size functions issue
  #1
jon
Guest
 
Posts: n/a
Hi all, I am using Gambit and have set up my geometry and have allocated size functions to edges. when I pave a face they seem to be used but not right down to the starting size I create. Is there a mimimum length set in the defaults or anything that could override them? it's becoming very frustrating.

Jon
  Reply With Quote

Old   December 13, 2006, 11:39
Default Re: Gambit Size functions issue
  #2
jon
Guest
 
Posts: n/a
Trying to look at this further I clicked in 'visualise size fucntion' and then initialise an dthe mimimum value is alot bigger than my start size.

I have set the size fucntion as 0.002, growth rate 1.06. and it says when i initialise that the min value is 0.6.

Any ideas would be appreciated. using gambit 2.2.30
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Help with fixing imported IGES model siw ANSYS Meshing & Geometry 24 August 24, 2010 11:22
unstructure mesh size control near to wall using gambit lalit kumar FLUENT 4 July 6, 2010 15:13
Speeding up size functions Riaan FLUENT 1 March 20, 2006 10:07
Gambit: mesh size to small??? Ralf Schmidt FLUENT 1 January 28, 2006 02:26
Size Functions in Gambit chanchala FLUENT 3 December 9, 2003 09:50


All times are GMT -4. The time now is 02:02.