CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

urgent help needed on dpm

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 18, 2006, 06:46
Default urgent help needed on dpm
  #1
vaishali
Guest
 
Posts: n/a
In discrete phase model, is there any way to find the exact position at which particle is getting trapped? Thanks !
  Reply With Quote

Old   December 18, 2006, 12:05
Default Re: urgent help needed on dpm
  #2
MM
Guest
 
Posts: n/a
YES! What you do is enable step-by-step report type and it will tell you position velocity, etc.
  Reply With Quote

Old   December 18, 2006, 12:23
Default Re: urgent help needed on dpm
  #3
vaishali
Guest
 
Posts: n/a
Thank you very much for the response !! But step by step response will give the information about the particles present in the domain and not the particles which are trapped. I am interested in the position at which particles are getting trapped.
  Reply With Quote

Old   December 18, 2006, 15:20
Default Re: urgent help needed on dpm
  #4
Jan
Guest
 
Posts: n/a
It is rare that you can find the solution to your problem at fluentusers, but in your case I think you can do it. At the fluentusers you can find a udf for counting wall hit, you can possible extend that to write the position. It is also described how to create a phs file which I think can solve your problem.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wall function for DPM needed AMusteykis FLUENT 0 January 13, 2010 16:02
Urgent help needed with dpm analysis Esosa FLUENT 0 June 12, 2009 05:06
URGENT - DPM Macro for custom bc cfd-user FLUENT 2 July 21, 2008 11:26
Urgent help needed with spray injection nick CD-adapco 14 June 29, 2008 18:48
Help with DPM UDF for OUTPUT needed Zhengcai Ye FLUENT 0 January 5, 2004 17:58


All times are GMT -4. The time now is 06:21.