Error in bc.c for VOF tutorial?

December 27, 2006, 08:21

Hi everyone!

I'm learning to simulate the VOF problem by using FLUENT. I started with tutorial, however, I face to problem in bc.c file. At step 2, after press INTERPRET, I got: "bc.c: line 1: parse error."

Could you suggest to me a solution for this problem.

Thanks so much!

December 30, 2006, 13:07

check if there is any space in the path of your bc.c, there should not be any in the directory/file names.

If u are using linux, this may be due to a stray character ^M in the bc.c text. Run dos2unix bc.c in the linux console and then try to interpret it.

December 27, 2006, 08:21	Error in bc.c for VOF tutorial?	#1
hungpavn Guest Posts: n/a	Hi everyone! I'm learning to simulate the VOF problem by using FLUENT. I started with tutorial, however, I face to problem in bc.c file. At step 2, after press INTERPRET, I got: "bc.c: line 1: parse error." Could you suggest to me a solution for this problem. Thanks so much!

December 30, 2006, 13:07	Re: Error in bc.c for VOF tutorial?	#2
sujith Guest Posts: n/a	check if there is any space in the path of your bc.c, there should not be any in the directory/file names. If u are using linux, this may be due to a stray character ^M in the bc.c text. Run dos2unix bc.c in the linux console and then try to interpret it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tutorial for subcooled nucleate boiling	Asghari	FLUENT	42	December 10, 2018 11:42
Problem on Fluent Tutorial: Horizontal Film Boilig	Feng	FLUENT	2	April 13, 2013 05:34
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
STAR-CD Tutorial	shekhar aryal	STAR-CD	4	March 22, 2010 03:25
Rotor/stator tutorial, and how to...	gilberto	CFX	5	January 21, 2002 09:41