CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Coal gasification HELP

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 1, 2007, 10:06
Default Coal gasification HELP
  #1
C.Y.Ler
Guest
 
Posts: n/a
I'm doing research on fluidized bed coal gasification using CFD fluent, the model i planned to use is non-premixed combustion model. Can someone please teach me how to set-up the model?? or anyone can share the tutorial of this gasification model. I appreciate any help from you guys.

thanks

cy_ler
  Reply With Quote

Old   January 2, 2007, 13:12
Default Re: Coal gasification HELP
  #2
Allan Walsh
Guest
 
Posts: n/a
You'll need to supply a bit more information if you want some meaningful suggestions. Is this a one week student project, multi-year funded study, etc.?

What are you trying to reseach? Model a piece of laboratory equipment? an industrial unit? Modeling the dynamics of a fluidized bed can be quite challenging - without gasification. Are you doing gasification? or combustion? or both? Do you need to keep track of potential pollutants like sulfur and nitrogen species? Do you have good data on gasification rates, intermediate species, etc?

Even for a relatively crude model, but one that is still representative, you would be looking at months or years of work.

Good luck.
  Reply With Quote

Old   January 3, 2007, 09:12
Default Re: Coal gasification HELP
  #3
C.Y.Ler
Guest
 
Posts: n/a
Thanks for your kind reply, Mr. Allan.

Well, it's my final year project for my first degree in university.

My project title is Fludized bed coal gasification, the main area i focus on is the gas released from the gasification process and no need to keep track of potential pollutants.

I had read some technical papers that state coal gasification can be model by non-premixed combustion model. But i don't have any idea how to set-up the model. What i have now is the fluent tutorial for coal combustion. So, is the set-up similar?

I need some guide in preparing the prePDF and setting up the non-premixed combustion model for coal gasification.

Thank you.

  Reply With Quote

Old   January 3, 2007, 18:43
Default Re: Coal gasification HELP
  #4
Allan Walsh
Guest
 
Posts: n/a
Sure, the tutorial is a good start. Once you have run a case with your geometry and boundary conditions and figured out what you want to look at, then you can make modificaitons as needed.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
coal gasification using FLUENT-DPM arnab FLUENT 14 November 21, 2014 05:59
Nonpremixed Combustion Model for Coal Gasification C.Y.Ler FLUENT 2 April 29, 2014 08:51
Coal gasification DYANA FLUENT 20 April 17, 2013 10:19
COal GAsification: defining Coal coalgas FLUENT 0 May 1, 2009 01:10
Coal Gasification Macy FLUENT 1 September 24, 2007 13:48


All times are GMT -4. The time now is 22:27.