CFD Online Logo CFD Online URL
Home > Forums > FLUENT

please please help

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 22, 2007, 21:10
Default please please help
Posts: n/a
i do elctrical ,thermal,flow simulation of 3D heating cell of 0.06m in diameter, and 0.28m in length how much and what type of mesh that i can use to achieve good results thanks in advance sihat
  Reply With Quote

Old   January 22, 2007, 23:37
Default Re: please please help
Ken Adams
Posts: n/a
I'm not quite sure what you mean by "good results". But as far as meshing scheme is concerned, I think you could use "Cooper" (in Mesh->Volume) to mesh your geometry. To determine if your result is mesh dependent, you could compare results of different number of grids and see if there is any difference. Hope this helps.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 23:10.