CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mesh problem for cylinder

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 29, 2007, 23:24
Default mesh problem for cylinder
  #1
akr
Guest
 
Posts: n/a
Hi,

I just want to create mesh for a cylinder. This cylinder doesn't have special geometry. (diameter 100 mm, height 500 mm) First, I mesh circular edges of the cylinder with a size function. And then, I meshed circular face. But gambit didn't make perfect meshs which have skewness nearly 0. Some meshes have skewness 0.15. Why does this happen? I meshed two circular edges of the cylinder same way, but maybe mesh intervals of two edges are not same. I cannot get it. Please help me...
  Reply With Quote

Old   January 30, 2007, 00:43
Default Re: mesh problem for cylinder
  #2
pinks
Guest
 
Posts: n/a
Mesh is good if skewness is 0 and worse if it is 1. You ahve good mesh quality.. dont worry. Refer user guide on meshing concepts.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic Mesh Problem. Tom Clark FLUENT 10 June 21, 2021 05:27
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
[GAMBIT] Problem with mesh. Please Help... maziboss ANSYS Meshing & Geometry 1 September 28, 2009 03:24
mesh generation problem Ellen FLUENT 7 February 18, 2009 22:20
mesh control problem TUM CFX 4 July 27, 2001 17:17


All times are GMT -4. The time now is 08:09.