CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

new mesh, same case file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 27, 2007, 09:50
Default new mesh, same case file
  #1
student
Guest
 
Posts: n/a
Hello,

I made a new mesh, and would like to import the settings, materials, equations,... of an old case file. This case file is made by someone else and I don't exactly know all the details about which materials, equations,... to use. Is it possible to automaticly import these settings in a new case file? I looked in the users guide, but it looks that this information in the case file always belongs together with the mesh.

thanks
  Reply With Quote

Old   January 29, 2007, 11:37
Default Re: new mesh, same case file
  #2
pinks
Guest
 
Posts: n/a
use write bc command and read bc TUIcommands. this will work provided geometry and boundary zones are named same, only u have refined or coarsened the grid.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
swak4foam building problem GGerber OpenFOAM Installation 54 April 24, 2015 16:02
wmake compiling new solver mksca OpenFOAM Programming & Development 13 August 18, 2014 22:26
Changing the grid on the same set-up Katya FLUENT 12 October 8, 2009 16:31
Compiling gmshFoam with OpenFOAM-1.5 BlGene Open Source Meshers: Gmsh, Netgen, CGNS, ... 10 August 6, 2009 04:26
Problem with rhoSimpleFoam matteo_gautero OpenFOAM Running, Solving & CFD 0 February 28, 2008 07:51


All times are GMT -4. The time now is 19:52.