CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

non-conformal mesh in gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 30, 2007, 09:47
Default non-conformal mesh in gambit
  #1
Andrew
Guest
 
Posts: n/a
Has anyone got any information about how to do non-conformal meshes in gambit. This website suggests you can do it:

http://www.fluent.com/software/gambit/walkthrough.htm

I found this on cfd-onine, but it only suggests using an interface.

http://www.cfd-online.com/Forum/flue....cgi/read/6827

I can create a non-conformal mesh in ICEM without using an interface boundary condition and fluent accepts and solves it fine.
  Reply With Quote

Old   January 31, 2007, 09:44
Default Re: non-conformal mesh in gambit
  #2
Pablo
Guest
 
Posts: n/a
you have to create the two non conformal meshes separately, then to export the meshes (.msh) and to use the tmerge fluent's utility, after that, in fluent, you have to define the interfaces.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
How to mesh a circle by Gambit? Zhengcai Ye FLUENT 5 March 24, 2006 02:04
Mesh import from gambit Kaushik Balakrishnan (Balakrishnan) OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 5 April 21, 2005 13:42
3-D Mesh Check in Gambit..... SHR FLUENT 4 March 25, 2003 04:10


All times are GMT -4. The time now is 21:07.