CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Difficult to perform YPLUS grid adaption.... (http://www.cfd-online.com/Forums/fluent/43707-difficult-perform-yplus-grid-adaption.html)

Dowsenar February 11, 2007 00:46

Difficult to perform YPLUS grid adaption....
 
My case is a two-phase system. The YPLUS in my case is about 20. So, I decided to reduce it by YPLUS adaption.

In doing this, I set the "MAX allowed" to be 1.0. When I perform the YPLUS grid adaption for the continous phase or dispersed phase. The following error always occurs. So, I finally failed to adapt the grid. What is the reason? Please advise. Thanks in advance.

================================================ Error: FLUENT received fatal signal (ACCESS_VIOLATION) 1. Note exact events leading to error. 2. Save case/data under new name. 3. Exit program and restart to continue. 4. Report error to your distributor. Error Object: ()



All times are GMT -4. The time now is 12:06.