CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   FLUENT - Separation Point Query (http://www.cfd-online.com/Forums/fluent/43883-fluent-separation-point-query.html)

asd February 24, 2007 02:58

FLUENT - Separation Point Query
 
For the condition of replicating the boundary layer transition over an airfoil, I have meshed two separate zones in Gambit, such that the condition of laminar flow can be applied for a specific domain, after which turbulent condition takes over as the flow moves aft towards the trailing edge. I am not sure where exactly in fluent the condition of laminar and turbulent flow can be applied independently for each zone. I have tried the boundary condition menu, but with no luck. Any advice?

Razvan February 24, 2007 13:19

Re: FLUENT - Separation Point Query
 
Try "define/boundary conditions/fluid" and check "laminar zone" option (that of course only for the laminar portion of the airfoil).


All times are GMT -4. The time now is 13:00.