CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Particle-laden jet simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 26, 2007, 16:26
Default Particle-laden jet simulation
  #1
tim
Guest
 
Posts: n/a
I am simulating a dilute particle-laden free gas jet(volume fraction 0.0001). The domain is axisymmetric, and the pressure outlet boundary conditions for outer BCs. I plotted the axial velocity distribution for solid phase along the radial distance. There is discontinuity near the boundary of the jet. however, if i used outflow bs, it is smooth, but the convergence is not quite good. Do you have any idea on it? I really appreciate if you can help me.

By the way, the velocity profile for gas phase is very good. Refining the grid makes no difference. Do you think it is caused by truncation error?

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluidized bed simulation VS particle tracking windhair CFX 2 June 28, 2011 22:10
pressure equation in Jet simulation kumar OpenFOAM Running, Solving & CFD 0 June 9, 2010 13:18
restarting lagrange (particle tracking) simulation dbdias CFX 0 September 22, 2007 20:26
LES simulation of sonic jet Jianping Main CFD Forum 0 January 21, 2005 06:52
air jet simulation Yue zou Main CFD Forum 0 September 28, 1998 09:30


All times are GMT -4. The time now is 06:58.