CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

skewness

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 6, 2007, 06:22
Default skewness
  #1
sam
Guest
 
Posts: n/a
whats maximum value of skewness for good simulation. and does fluent 6.3 make the automatic corrections to high skewed elements?
  Reply With Quote

Old   March 6, 2007, 19:58
Default Re: skewness
  #2
Ronald
Guest
 
Posts: n/a
Hi,

The skewness of your elements should be less than 0.7 to have a good mesh and a clean solver run without divergence.

Ta

Regards

Ronald
  Reply With Quote

Old   March 7, 2007, 00:26
Default Re: skewness
  #3
sam
Guest
 
Posts: n/a
And how to achieve this in gambit. what about 0.9 value?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
TGrid High Skewness khimkhim ANSYS Meshing & Geometry 1 February 18, 2010 00:36
problem with skewness jjchristophe FLUENT 1 January 14, 2010 22:22
Severe nonorthogonality and severe skewness problem qtian OpenFOAM Running, Solving & CFD 2 January 22, 2008 19:47
Skewness Taskin FLUENT 5 April 6, 2005 15:21


All times are GMT -4. The time now is 14:19.