|
[Sponsors] |
March 10, 2007, 03:54 |
Meshing Volume Error
|
#1 |
Guest
Posts: n/a
|
Hello Firends
I would like to say that while meshing the volume , there were an error that appears in the transcript windows saying :ERROR : Face Face.15 has less than three boundary nodes on one or ore of face node loops , which prevents it from being meshed . this Error appear for 5 faces : 1, 15 ,22 ,23 ,59 ;(this faces are on the base of the wind turbine ) so What shall i do ?? I need to mesh the volume but i couldnt bcoz of this ; I will appreciate ur help thanks |
|
March 12, 2007, 12:10 |
Re: Meshing Volume Error
|
#2 |
Guest
Posts: n/a
|
You will need to look at those faces again. In order to mesh a face, you need at least 3 edges or 3 boundary nodes. Zoom into the faces with the error and see if you can find why Gambit sees it as less than 3 faces. - Phil
|
|
March 12, 2007, 12:34 |
Re: Meshing Volume Error
|
#3 |
Guest
Posts: n/a
|
thank you very much foryou reply , i will try to look into these faces Hassan
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
polynomial thermophysical properties II | sebastian | OpenFOAM Running, Solving & CFD | 54 | November 21, 2019 08:12 |
[OpenFOAM] Native ParaView Reader Bugs | tj22 | ParaView | 270 | January 4, 2016 12:39 |
POSDAT problem | piotka | STAR-CD | 4 | June 12, 2009 09:43 |
user subroutine error | CFDUSER | CFX | 2 | December 9, 2006 07:31 |
user defined function | cfduser | CFX | 0 | April 29, 2006 11:58 |