CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Pump in a sump meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 13, 2007, 00:52
Default Pump in a sump meshing
Ashwin C Punjabi
Posts: n/a
Hello All, How are you? I have modelled a pump with a outside thickness of 25.4mm and want to mesh it once it is inside the sump. The pump has 4 vanes. I have created a single volume by subtracting it from the sump. The tough part is the mesh. please advice. Thankyou Ashwin.C.Punjabi
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
confused with meshing pump with turbogrid eng_norouzi ANSYS Meshing & Geometry 0 August 19, 2011 14:02
pump meshing inside the sump ashwin FLUENT 0 March 16, 2007 07:57
UDF for dynamic meshing of lube pump vinay kulkarni FLUENT 0 February 20, 2007 15:17
meshing blade centrifugal pump mino CFX 5 December 2, 2006 01:54
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 11:09

All times are GMT -4. The time now is 08:26.