problem about the change colors in Fluent
Hi guys,
I need your help!!! I can not change the color of background of the plot windows from black to white in Fluent. If I did so, the forground will change too. Do we have to change it under unix? Thank you very much for your help!!! Best, Lisa |
Re: problem about the change colors in Fluent
Well u can change it. once u have the contour plot right click on the title bar (the one on which u see minimize, maximize and cross on top corner of a window). go to page setup and in options chek reverse fore/back gound.
hope this helps. Regards |
Re: problem about the change colors in Fluent
At the command window write:
display-->set-->colors-->background-->"white"-->foreground--> "blue" good luck |
Re: problem about the change colors in Fluent
Thank you very much for your help. But it seems not work. there is no reponse when I change the reverse for/back ground in the title bar. I am using fluent 6.1.26 in pc. Regards, Lisa
|
Re: problem about the change colors in Fluent
Thank you very much for your help. But it seems not work. there is no "set" after "display" in my pc. I am using fluent 6.1.26 vision. Regards, Lisa
|
Re: problem about the change colors in Fluent
May be u r not doing it correct but for sure it is how it works. And I strongly advice that u have a further careful look at the procedure.
Regards |
Re: problem about the change colors in Fluent
Hi, save> hard copy > jpeg -select color from gray scale , (do not change or deselect reverse background tab). if the pic in display is in black background,the pic saved will be in white back ground and vis versa.
hope it helps F Alam |
Re: problem about the change colors in Fluent
It works after the hard copy.
Thank you very much. Regards, Lisa |
Re: problem about the change colors in Fluent
Thank you very much for your reply. I will try again. but it doesn't work for sure in my pc. But the hard copy (like what farhath said)is working very well. Regards, Lisa
|
All times are GMT -4. The time now is 16:34. |