CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

problem about the change colors in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 18, 2007, 08:25
Default problem about the change colors in Fluent
  #1
lisa
Guest
 
Posts: n/a
Hi guys,

I need your help!!!

I can not change the color of background of the plot windows from black to white in Fluent. If I did so, the forground will change too. Do we have to change it under unix?

Thank you very much for your help!!!

Best,

Lisa

  Reply With Quote

Old   March 18, 2007, 09:03
Default Re: problem about the change colors in Fluent
  #2
Shaik Rizwan
Guest
 
Posts: n/a
Well u can change it. once u have the contour plot right click on the title bar (the one on which u see minimize, maximize and cross on top corner of a window). go to page setup and in options chek reverse fore/back gound.

hope this helps. Regards

  Reply With Quote

Old   March 19, 2007, 10:56
Default Re: problem about the change colors in Fluent
  #3
Pablo
Guest
 
Posts: n/a
At the command window write:

display-->set-->colors-->background-->"white"-->foreground--> "blue"

good luck
  Reply With Quote

Old   March 19, 2007, 11:34
Default Re: problem about the change colors in Fluent
  #4
lisa
Guest
 
Posts: n/a
Thank you very much for your help. But it seems not work. there is no reponse when I change the reverse for/back ground in the title bar. I am using fluent 6.1.26 in pc. Regards, Lisa
  Reply With Quote

Old   March 19, 2007, 11:36
Default Re: problem about the change colors in Fluent
  #5
lisa
Guest
 
Posts: n/a
Thank you very much for your help. But it seems not work. there is no "set" after "display" in my pc. I am using fluent 6.1.26 vision. Regards, Lisa
  Reply With Quote

Old   March 19, 2007, 11:42
Default Re: problem about the change colors in Fluent
  #6
Rizwan
Guest
 
Posts: n/a
May be u r not doing it correct but for sure it is how it works. And I strongly advice that u have a further careful look at the procedure.

Regards
  Reply With Quote

Old   March 20, 2007, 07:43
Default Re: problem about the change colors in Fluent
  #7
farhath
Guest
 
Posts: n/a
Hi, save> hard copy > jpeg -select color from gray scale , (do not change or deselect reverse background tab). if the pic in display is in black background,the pic saved will be in white back ground and vis versa.

hope it helps F Alam
  Reply With Quote

Old   March 20, 2007, 08:50
Default Re: problem about the change colors in Fluent
  #8
lisa
Guest
 
Posts: n/a
It works after the hard copy.

Thank you very much.

Regards,

Lisa
  Reply With Quote

Old   March 20, 2007, 08:55
Default Re: problem about the change colors in Fluent
  #9
lisa
Guest
 
Posts: n/a
Thank you very much for your reply. I will try again. but it doesn't work for sure in my pc. But the hard copy (like what farhath said)is working very well. Regards, Lisa
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fluent convergence problem josip76 FLUENT 0 May 26, 2011 21:08
[ICEM] [FLUENT] 2D Geometry problem when exporting to Fluent - Unwanted walls MikeTichondrius ANSYS Meshing & Geometry 1 February 9, 2011 14:31
problem about periodic boundary condition in Fluent winnawinna FLUENT 0 December 29, 2010 00:32
Can I solve this problem by Fluent? Kai_kc FLUENT 1 October 27, 2010 06:29
Can FLUENT solve this type of problem? Whitaker FLUENT 3 October 23, 2000 04:01


All times are GMT -4. The time now is 13:27.