CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Porous Media (http://www.cfd-online.com/Forums/fluent/44265-porous-media.html)

efra March 27, 2007 09:56

Porous Media
 
Hello everybody!

I am trying to simulate two layers of stents (fine spirals) using Porous Madia approach. One spiral goes in one direction and the second in the oposite direction, it will give a square grid.

Both spirals will reduce the flow into a cavity, and I am simulating the spirals (porous media) only at the entrance of the cave.

My question is How to set this kind of geometry in fluent, I mean which vectors direction do I have to take for the first and second porous zone?? by the way the cavity is attached to a pipe (3d) and the porous zones are curved.

Is it possible to do that in Fluent???

I have prepared the geometry in Gambit, but I am havins problems to set the case in Fluent.

I will appreciate your answers.

Efra

narges April 10, 2007 01:45

Re: Porous Media
 
hello i can not prepared the porous media geometry in gambit. my project is flow under ground in aquifer.please help me for modeling in gambit.

narges April 10, 2007 01:46

Re: Porous Media
 
hello i can not prepared the porous media geometry in gambit. my project is under ground flow in aquifer.please help me for modeling in gambit.


All times are GMT -4. The time now is 18:33.