CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

error in meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 5, 2007, 16:23
Default error in meshing
  #1
Ankit
Guest
 
Posts: n/a
i just installed gambit2.2.30. while exporting the *.msh file it says "ERROR: continuum or boundary condition on edge.4 is invalid for fluent 6" when i use fluent5/6 as the solver but not when i use some other solver...... also i didnt have this problem when i used earlier version of gambit2.04...

plzzzzz helppppppp
  Reply With Quote

Old   April 9, 2007, 06:36
Default Re: error in meshing
  #2
Phil
Guest
 
Posts: n/a
just try changing the boundary to wall for example and see if it reads it.

what kind of boundary is edge 4 just now? are you sure it can be used that way in fluent?

YOU MIGHT HAVE e.g. SET EDGE TO WALL IN 3D MODEL WHERE ONLY FACES SHOULD BE WALLS.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing David-CFD ANSYS Meshing & Geometry 1 April 1, 2011 06:22
Best Meshing scheme for Cylinder Nutrex Main CFD Forum 4 July 29, 2008 12:03
Meshing locks workbench window. andy2o CFX 0 February 1, 2008 06:01
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 12:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 12:08


All times are GMT -4. The time now is 04:34.