CFD Online URL
[Sponsors]
Home > Forums > FLUENT

re:about ejectors

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 6, 2007, 14:42
Default re:about ejectors
  #1
ravi
Guest
 
Posts: n/a
hi friends i m simulating ejector flow, the nozzle is not collinear with secondary inlet. i want to simulate the no-load condition i,e secondary mass is zero and the secondary inlet becomes wall. in applying boundary condition there is one problem, one line is continuing from the secondary inlet to nozzle exit. that line when i give boundary condition up to nozzle inlet as wall and after that it is inside the domain so i have declared it as interior. when i declare like that error is coming can aby body tell some solution to the problem
  Reply With Quote

Old   December 29, 2011, 15:46
Default
  #2
New Member
 
goami
Join Date: Dec 2011
Posts: 6
Rep Power: 4
goami is on a distinguished road
split that edge near the secondary inlet and specify accordingly........
goami is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coanda ejectors Rajesh FLUENT 5 December 12, 2010 11:02
re:about modelling of multi phase flow satya FLUENT 1 November 20, 2009 10:41
coanda ejectors Nuray Kayakol Main CFD Forum 0 February 10, 2000 05:38


All times are GMT -4. The time now is 19:56.