CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Boundary Conditions - air-blast atomizer model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 7, 2007, 05:02
Default Boundary Conditions - air-blast atomizer model
  #1
Sofia
Guest
 
Posts: n/a
Hi all,

My study object consist of a spacer device (holding chamber) attached to the MDI (metered dose inhaler). This device the inhalation releases of the spray (heterodisperse aerosol containing a drug in suspension with propellant HFA 134a) with initial velocity 30 m/s, which subsequently evaporate and cool. After one lecture on tutorial "Discrete Phase Models" I think that the "Air-Blast/Air-Assist Atomizer Model" is that type of injection more suitable. However I to keep doubt relatively of the use this type of injection, namely:

- Is necessary any boundary conditions in special? I don't understand when in the tutorial say "You must create the atomizing air streams as boundary conditions"?;

Thank you for your help.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 45 February 8, 2016 05:42
boundary condition_vof model garima chaudhary FLUENT 0 October 9, 2007 02:08
Boundary conditions for wind tunnel model Sandile Peta FLUENT 3 January 31, 2006 09:07
Copying boundary conditions from model to model Lior FLUENT 3 September 23, 2004 16:10
VOF model - Boundary conditions A.Praveen FLUENT 2 April 3, 2000 08:46


All times are GMT -4. The time now is 19:08.