CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How to model combustion with only methane stream? (http://www.cfd-online.com/Forums/fluent/44392-how-model-combustion-only-methane-stream.html)

ligang zheng April 9, 2007 09:45

How to model combustion with only methane stream?
 
I want to model combustion of a methane stream issuing into a quiescent closure(or space) filled wiht air.

Maybe non-premixed combustion in fluent can be used. But Fluent need at least a fuel stream and a oxdizer stream. In my case, fuel stream is methane. However, how to set the oxider stream? It is difficult to define oxdizer stream in fluent because oxdizer required for methane combustion is supplied by air in quiesecent closure.

It is a transient question.

How to deal with this case?

thanks

ligang zheng

muhsin hanis April 12, 2007 09:45

Re: How to model combustion with only methane stre
 
have you tried to set BC the mass fraction inlet for methane to 1 and then patch value in your quiescent closure for mass fraction to 0

mohamed saleh May 1, 2007 09:16

Re: How to model combustion with only methane stre
 
i'm pleased to know you,please help me to find the following: all files is required: data base,mesh,case,data and analysis file


All times are GMT -4. The time now is 10:49.