CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How to set to unsteady state

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 10, 2007, 05:27
Default How to set to unsteady state
  #1
Cynthia
Guest
 
Posts: n/a
Hi

I'm now doing a heat transfer on a hollow core concrete block. I need to set the top concrete surface temperature to let say 30C and with a known thermal transfer rate the k value and also the heat grneration rate, so now I want to let it run and give me the bottom surface temperature. May I know how should I do it?

Furthermore, I would also like to know how to run the program at different time steps. Thank you so much

Yours Sincerely Cynthia
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Instalation on ubuntu 710 basilwatson OpenFOAM Installation 17 March 16, 2012 21:16
How to show the transient case? H.P.LIU Phoenics 7 July 13, 2010 04:31
Installation problems indy OpenFOAM Installation 7 April 3, 2009 09:40
How to set environment variables kanishka OpenFOAM Installation 1 September 4, 2005 10:15
unsteady state pollutant source Juan Phoenics 0 January 31, 2004 13:58


All times are GMT -4. The time now is 06:09.