CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How to create postprocessing planes in Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 12, 2007, 04:08
Default How to create postprocessing planes in Gambit
  #1
kyaw kyaw
Guest
 
Posts: n/a
Dear Mr / Ms,

I am learning in Calculation of Flow Uniformity Tutorial( Tutorials with a Focus on User Defined Functions). http://learningcfd.com/login/fluent/...ials/index.htm In this tutorial, I would like to know how to create postprocessing planes post-01,post-02,post-03 and post-04 in Gambit?

Any comment will be appreciated.

Regards

Kyaw

  Reply With Quote

Old   April 23, 2007, 15:02
Default Re: How to create postprocessing planes in Gambit
  #2
Tim
Guest
 
Posts: n/a
If you were creating this mesh from scratch you would have to create the planes as if they were walls within Gambit. Make sure to leave them as "walls" when you export the mesh and then change them to interior surfaces in FLUENT. You should then be able to use these surfaces in post-processing.

Alternatively, you could create iso-surfaces of type "Grid" within FLUENT and create surfaces or cross-sections throughout the mesh that you can post-process on without actually creating them in Gambit.
  Reply With Quote

Old   April 23, 2007, 17:16
Default Re: How to create postprocessing planes in Gambit
  #3
Jo Jo
Guest
 
Posts: n/a
Hello Tim, Thank for your reply. I tried in Gambit . Creating the faces and give them as interior surfaces in face zone panel. It can aslo possible as post-processing plane in Fluent. regards, Kyaw Kyaw

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
create turbine geometry with gambit badlaine ANSYS Meshing & Geometry 2 March 26, 2012 23:54
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 06:29
how to create 3d model using GAMBIT fayaz FLUENT 5 April 10, 2010 02:30
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 09:33
GAMBIT and Turbomachinery tom Main CFD Forum 6 October 21, 1999 09:50


All times are GMT -4. The time now is 19:34.