CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Solving at zero operating pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 21, 2007, 14:36
Default Solving at zero operating pressure
  #1
Benjamin Zachariah
Guest
 
Posts: n/a
Hi, i'm running a pipe flow problem with inlet pressure of 8 bar and i want outlet pressure as 0 bar, with an operating pressure of 0 bar. it always end in divergence. any ideas? URF are all set low, pressure based solver, k-epsilon viscous model, 2nd order discretisation.

any help would be grately appreciated.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
alphaEqn.H in twoPhaseEulerFoam cheng1988sjtu OpenFOAM Bugs 15 May 1, 2016 17:12
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 05:03
Problems with simulating TurbFOAM barath.ezhilan OpenFOAM 13 July 16, 2009 06:55
Unknown error sivakumar OpenFOAM Pre-Processing 9 September 9, 2008 13:53


All times are GMT -4. The time now is 13:41.