Instructions needed for 6.2.16 on dual core
I need instructions on how to run a process on a P4 dual core utilizing both cores with fluent 6.2.16.
Many, many thanks in regard |
Re: Instructions needed for 6.2.16 on dual core
fluent 3ddp -t2 and optionally -pnet
|
Re: Instructions needed for 6.2.16 on dual core
thanks for the reply! I am intrested in 2ddp. is it possible?
|
Re: Instructions needed for 6.2.16 on dual core
Try it? But yes, it should work. Bear in mind though that it is going to have to be a fairly large 2D problem before it will get much benefit from running in parallel. At least 200 000 cells or so.
|
Re: Instructions needed for 6.2.16 on dual core
how do u do u get running on dual core? Can u tell me how to ? i need you to give the settings to do so
|
Re: Instructions needed for 6.2.16 on dual core
From the command line,
fluent 2ddp -t2 should do it, assuming that you have a parallel license |
Re: Instructions needed for 6.2.16 on dual core
If you have never launched from command line before, you will need to have fluent setup the environment using "Set Environment" under Fluent.Inc products in windows.
Then you can use "fluent 2ddp -t2" Otherwise you have to type the full path to the directory in which you have fluent installed. |
Re: Instructions needed for 6.2.16 on dual core
Many, many thanks to everybody! :) I will try it out as soon as i can
|
Re: Instructions needed for 6.2.16 on dual core
hey is that you Demetrios from the CFD centre in Leeds? It's Phil(Scottish).
|
All times are GMT -4. The time now is 12:29. |