CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Error, Pls help me

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 2, 2007, 11:45
Default Error, Pls help me
  #1
sisir
Guest
 
Posts: n/a
I am trying to model a jet flow. So when I am putting the species it is showing some error just after the first iteration and job is not running.

Error: = (equal): invalid argument [1]: wrong type [not a number] Error Object: nan

Kindly help me.
  Reply With Quote

Old   May 2, 2007, 15:42
Default Re: Error, Pls help me
  #2
Phil
Guest
 
Posts: n/a
are you using a UDF? If so it's a problem with the UDF, although it is good enough to compile.
  Reply With Quote

Old   May 2, 2007, 23:20
Default Re: Error, Pls help me
  #3
sisir
Guest
 
Posts: n/a
I am not using UDF.
  Reply With Quote

Old   May 2, 2007, 23:52
Default Re: Error, Pls help me
  #4
sisir
Guest
 
Posts: n/a
Thanks for ur reply. I am not using UDF but i am importing the CHEMKIN FILES to the fluent for the species.
  Reply With Quote

Old   May 3, 2007, 04:14
Default Re: Error, Pls help me
  #5
Phil
Guest
 
Posts: n/a
it sounds to me like there is a problem with the Chemkin files. Try using them on another model that you know works. It's really the only thing that I can think of. All the normal fluent options are on drop down menus and shouldn't cause these errors.
  Reply With Quote

Old   May 3, 2007, 06:13
Default Re: Error, Pls help me
  #6
sisir
Guest
 
Posts: n/a
Thanks for your suggestion. I will try the same. I have one doubt i.e., "pressure far field" condition will work for mixture or not !

  Reply With Quote

Old   May 3, 2007, 06:15
Default Re: Error, Pls help me
  #7
Phil
Guest
 
Posts: n/a
wish i could help you further - all I know is that when you start reading UDF's into fluent you get a similar error if the UDF is shit. I expect the Chemkin files do the same but you should ask someone with experience of Chemkin. Perhaps post a nother message.
  Reply With Quote

Old   May 3, 2007, 06:56
Default Re: Error, Pls help me
  #8
sisir
Guest
 
Posts: n/a
Thanks a lot for your usefull suggestion. I imported the few species from the FLUENT DATA BASE. Now it is running. But FLUENT DATA BASE doesn't have all the species what I require. Than how shall I define all the species!
  Reply With Quote

Old   May 3, 2007, 06:59
Default Re: Error, Pls help me
  #9
sisir
Guest
 
Posts: n/a
If i will use the UDF file for the species then how shall i elliminate the above error?
  Reply With Quote

Old   May 3, 2007, 09:01
Default Re: Error, Pls help me
  #10
Phil
Guest
 
Posts: n/a
You can list all the available species on the main fluent window. There are at least hundreds!

Everything you need should be in the fluent documentation. Without seeing the model it's very hard to diagnose.
  Reply With Quote

Old   May 3, 2007, 10:15
Default Re: Error, Pls help me
  #11
sisir
Guest
 
Posts: n/a
Thanks a lot. I am trying to do the same. Then I will inform u.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 23:21.