Standard wing for aerodynamic evaluation
Hi all,
I would be grateful if I could get help ...suggestions...ideas about how to get an Aircraft wing model...(a standard one with a control surface preferably an aileron ) I will be using Fluent for my Aerodynmic assessment. Thanks very much. M. |
Re: Standard wing for aerodynamic evaluation
You'll need to create the model yourself using Gambit. Do all the tutorials.
Alternatively pay someone money. |
Re: Standard wing for aerodynamic evaluation
threre no need to do all the tutorials , i think all what u shoud do is to looking for a book handling the WING issues , you will get the equations then u can solve it . Iam trying also to do the sma ething , and I am looking for that , so if u wnat we can help each other . I am also wnaa modeling the WIng on the Fluent .
|
Re: Standard wing for aerodynamic evaluation
I saw a reply posted on the main forum that made me realize that i think what you are looking for is the dimensions/geometry of the wing.
HAS: go and look on the main forum at the same message and you'll see a link posted by someone else to a website containing wing geometries. |
Re: Standard wing for aerodynamic evaluation
Thanks guys,
I posted it twice to get more answers ;) HAS, Yes It would be helpful for both of us if we could work collaborate with each other... Is the wing you are trying to consider with a control surface? if so: what kind of control surface? Hope to hear from you sooner:) M. |
Re: Standard wing for aerodynamic evaluation
Actually I am workin on a wind turbine , but i need the wing geometry to model it on gambit and fluent . However , I may be interested in ur projects , can you please send me details of ur projects to my email . so that we can collaborate , Thanks for your reply !
|
Re: Standard wing for aerodynamic evaluation
Thanks for the reply!
> but i need the wing geometry to model it on gambit and fluent I will send you the projects description by this afternoon you deal with wings or turbines? I am confused!!! hear from you sooner |
Standard wing for aerodynamic evaluation
Hi,
I want to mesh a wind turbine using gambit. That's the problem: I can mesh all the surfaces but when i want to mesh the volume, appears one error. Check the skewness in areas of small gaps. How can I solve this problem? I redrawed all the surfaces in gambit but the problem persists. I hope somebody can help me. Thank you very much. |
Re: Standard wing for aerodynamic evaluation
interesting question! for whcih i don't have an interesting answe am afraid!
|
All times are GMT -4. The time now is 17:53. |