CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Need help !!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 3, 2007, 07:47
Default Need help !!!
  #1
H.A.S
Guest
 
Posts: n/a
hello ,

How can i draw a 3d wing naca 0015 or other , to be imported on gambit and analysed on fluent ?? Plz it is very urgent !! JUST i would like to be helpd with the drawing ! any advices r welcomed

thanks
  Reply With Quote

Old   May 3, 2007, 11:16
Default Re: Need help !!!
  #2
H.A.S
Guest
 
Posts: n/a
I need ur help !!!
  Reply With Quote

Old   May 3, 2007, 12:17
Default Re: Need help !!!
  #3
nick
Guest
 
Posts: n/a
you need to have coordinates of the airfoil section(s).then you can create the 3D model directly in Gambit, or you can use other softwares (e.g. ProE) and export the model as IGES or STEP file to be imported into Gambit.
  Reply With Quote

Old   May 3, 2007, 14:05
Default Re: Need help !!!
  #4
H.A.S
Guest
 
Posts: n/a
thanks for ur reply ,

I have the 2d coordinates of the airfoil and i know how to import it to ambit BUT , How can i make it as 3d in gambit ;this is my problem I have stong backgroung with gambit and fluent , regards
  Reply With Quote

Old   May 4, 2007, 08:00
Default Re: Need help !!!
  #5
Thomas
Guest
 
Posts: n/a
well, if u have the 2d section, just extrude it with mesh...

thomas
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 12:02.