CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Text User Interface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 7, 2007, 08:58
Default Text User Interface
  #1
John Young
Guest
 
Posts: n/a
Does anybody know how to partition a mesh in the parallel solver using the text-user-interface? Thanks, John
  Reply With Quote

Old   May 9, 2007, 15:33
Default Re: Text User Interface
  #2
sv
Guest
 
Posts: n/a
The commands are parallel/partition Then you can choose the method i.e., catersian strip, prinicipal axes etc., Then it will ask you the no of partitions you want. Hope this helps. Let me know if you have more questions.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
Modify constant values via Text User Interface Marvin FLUENT 3 November 12, 2012 19:21
Fluent: Text user interface antallo FLUENT 2 April 1, 2011 18:34
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 20:53.