time-averaged contour profile

May 17, 2007, 17:49

Hi,

Can anyone tell me how to get a time-averaged contour or velocity magnitudes in Fluent ? Should I have to do a UDF for it ?

Thanks in advance.

May 18, 2007, 10:44

While you are running the model you need to turn on the time averaging feature in Fluent (solve ... set ... data sampling ...) and you will get a new set of data in contour options. Make sure to save the case after you do this for future use. I am not sure in which version this was added.

May 17, 2007, 17:49	time-averaged contour profile	#1
rana Guest Posts: n/a	Hi, Can anyone tell me how to get a time-averaged contour or velocity magnitudes in Fluent ? Should I have to do a UDF for it ? Thanks in advance.

May 18, 2007, 10:44	Re: time-averaged contour profile	#2
bashu Guest Posts: n/a	While you are running the model you need to turn on the time averaging feature in Fluent (solve ... set ... data sampling ...) and you will get a new set of data in contour options. Make sure to save the case after you do this for future use. I am not sure in which version this was added.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
directMapped problem	panda60	OpenFOAM Bugs	4	July 8, 2010 10:23
Time Averaged Moment Coefficient	prasad84	FLUENT	0	October 16, 2009 14:27
BC profile time variant	Alessio	CFX	0	February 22, 2008 05:09
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 14:09
getting concentration profile every time step	Ajay	FLUENT	2	July 21, 2004 23:49