CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How to zoom in a residual plot?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree2Likes
  • 2 Post By Obi

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 24, 2007, 09:17
Default How to zoom in a residual plot?
  #1
Ken Adams
Guest
 
Posts: n/a
Hello everyone,

I tried using mouse buttons to zoom in a residual plot to take a close look at convergence, but it turned out to be drawing lines on the plot. So can anyone help me?

Thank you,

Ken
  Reply With Quote

Old   May 24, 2007, 09:35
Default Re: How to zoom in a residual plot?
  #2
Obi
Guest
 
Posts: n/a
In Solve > Monitors > Residuals there is a box in the top right labelled plotting. In there you can change the axis range or simply tell it to plot the last 100 instead of the default 1000 residuals.
bgp723 and Darko like this.
  Reply With Quote

Old   May 24, 2007, 10:11
Default Re: How to zoom in a residual plot?
  #3
Ken Adams
Guest
 
Posts: n/a
Thank you very much for answering my question. So is it a real time zoom in (y scale automatically updated during calculation) or postprocessing?
  Reply With Quote

Old   May 24, 2007, 15:50
Default Re: How to zoom in a residual plot?
  #4
Prasad Dudhgaonkar
Guest
 
Posts: n/a
You can also zoom in a residual plot by changing scale on x-axis (or y-axis if needed).
  Reply With Quote

Old   May 24, 2007, 18:20
Default Re: How to zoom in a residual plot?
  #5
Ken Adams
Guest
 
Posts: n/a
Thank you.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
transsonic nozzle with rhoSimpleFoam Unseen OpenFOAM Running, Solving & CFD 8 July 1, 2022 07:54
Extrusion with OpenFoam problem No. Iterations 0 Lord Kelvin OpenFOAM Running, Solving & CFD 8 March 28, 2016 12:08
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 16:33
Orifice Plate with a fully developed flow - Problems with convergence jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 06:24
Differences between serial and parallel runs carsten OpenFOAM Bugs 11 September 12, 2008 12:16


All times are GMT -4. The time now is 05:52.