CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

skewness

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 1, 2007, 09:45
Default skewness
  #1
Donia
Guest
 
Posts: n/a
hi everyone, could you tell me how to verify skewness in Gambit!
  Reply With Quote

Old   June 1, 2007, 15:05
Default Re: skewness
  #2
nick
Guest
 
Posts: n/a
hi donia, click on Examine Mesh (bottom-right button), Display Type: Range, select all element types, Quality Type: EquiSize Skew, Update. The green bar will give you info on the skewness distribution. You can also click on the Mesh Command Button (top-right button), right click on the "i" in the volume panel (or Face panel for 2D) and select "check", select the volumes (or faces) you want to check, Apply. Enlarge the Transcript window and see the info. See the manual for good mesh quality requirements.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
TGrid High Skewness khimkhim ANSYS Meshing & Geometry 1 February 18, 2010 00:36
problem with skewness jjchristophe FLUENT 1 January 14, 2010 22:22
Severe nonorthogonality and severe skewness problem qtian OpenFOAM Running, Solving & CFD 2 January 22, 2008 19:47
Skewness Taskin FLUENT 5 April 6, 2005 16:21


All times are GMT -4. The time now is 22:28.