CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Drawing velocities of phases separately

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 10, 2007, 09:40
Default Drawing velocities of phases separately
  #1
K. Baker
Guest
 
Posts: n/a
Hi I need to draw the velocity of phases water and air separately can anyone guide me to how can I did this because the VOF model draw only the velocity of mixture and not give the velocities of the individual phases?

Thanks a lot K. Baker

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Extract primary phase thread in VOF with 3 phases Eric FLUENT 2 July 7, 2011 03:22
Conversion of computed velocities in Lagrangian coordinates to Eulerian coordinates SMM STAR-CD 4 June 5, 2011 10:20
Derived velocities from loss coefficients ?? jakjak CFX 1 December 20, 2007 15:38
How to draw the velocity of phases separately kb FLUENT 0 August 25, 2007 08:25
How to Set the velocities of two phases K Saleem FLUENT 1 June 10, 2006 02:41


All times are GMT -4. The time now is 04:04.