CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

problem about Map and cooper!pls!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 11, 2007, 02:48
Default problem about Map and cooper!pls!!
  #1
free
Guest
 
Posts: n/a
map an cooper i have quastion about map and cooper scheme: i mesh a cylinder that splited by a cube whit center of cylinder. i use map and see very bad quality mesh(by examanie mesh) also fluent give non-positive warning. but when i use cooper i havent any problem,even though they have a same shape . why there is a difference. Tankx alot for ur answers. Free
  Reply With Quote

Old   June 11, 2007, 09:15
Default Re: problem about Map and cooper!pls!!
  #2
AJ
Guest
 
Posts: n/a
Could you split the cylinder with a reactangula face?

Could you split it using larger cube.... Do you still retaining the cube?

It should be easy if you split the face using face dividing the cylinder into half.... Also select the source and target faces....

Have fun... AJ

  Reply With Quote

Old   June 11, 2007, 13:48
Default Re: problem about Map and cooper!pls!!
  #3
free
Guest
 
Posts: n/a
HItankx for ur attention. i havent any pronlem whit meshing , i mesh it by cooper and map and they have a similar shape . but when i use examaine mesah i face whit alot bad cells in map scheme.but cooper scheme dosnt have any bad cell Best

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 18:59.