CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

ACIS Error 30001 ??

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 20, 2007, 02:25
Default ACIS Error 30001 ??
  #1
mike
Guest
 
Posts: n/a
Hi folks, I am trying to mesh my SAE Aerodesign plane in GAMBIT, but I've run into a fairly preliminary problem:

I've imported the CAD, as a .iges file. It was created in Solidworks 2005. When I import the file, I find that there are 13 (or so) volumes in existence. My plan is to unite the volumes until only one volume remains (call it V1). After this point, I plan to create the far field volume (V2), and then subtract V1 from V2 to create the volume that will eventually be meshed.

When uniting two of the volumes, I receive the following error:

ACIS error 30001: coincident face_face_ints with different body vertices Restoring the geometric model to the state before current operation (if there is a positive number of default UNDO levels).

Does anyone know what the origin of this might be?

Also, does my plan thus far sound ok? Any advice on meshing strategies after this problem is solved?

Thanks very much for your time,

Mike
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
acis error 30001 umesh FLUENT 0 February 12, 2009 05:51
ACIS error 30001: Sanjay Jain FLUENT 0 April 8, 2008 07:20
ACIS erro 50005 rahul FLUENT 0 July 5, 2006 16:57
acis import to cfx-build strudl CFX 1 July 25, 2003 16:44
Importing Acis file to gambit Habib FLUENT 5 June 25, 2001 06:19


All times are GMT -4. The time now is 08:36.