CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

second order convergence problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 15, 2007, 08:56
Default second order convergence problems
  #1
Phil
Guest
 
Posts: n/a
Hello there,

I'm having problems with errors starting and growing in my grid when switching to 2nd order on a fully converged RSM 750k cell air only calculation. Turbulent viscosity grows until it starts being limited in cells.

The grid is good quality - max skewness of around 0.74 with <1% at around 0.37. And the errors often come in at the early 'ambient' stages of the model where cells are almost perfectly rectangular.

Relaxation factors are also all down and the first order solution converged well for a 750k cell grid.

Any help would be very much appreciated!

Regards Phil
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Force can not converge colopolo CFX 13 October 4, 2011 22:03
NS Equations and convergence problems RameshK Main CFD Forum 3 November 8, 2010 11:33
Convergence of CFX field in FSI analysis nasdak CFX 2 June 29, 2009 01:17
Convergence problems Olivier Macchion CFX 4 January 22, 2003 01:57
Convergence problems - steady/unsteady Jonathan Zerihan Main CFD Forum 4 October 30, 1998 12:00


All times are GMT -4. The time now is 22:17.