CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   outflow boundary condition for multiphase flow (http://www.cfd-online.com/Forums/fluent/45118-outflow-boundary-condition-multiphase-flow.html)

deepak June 21, 2007 04:42

outflow boundary condition for multiphase flow
 
is it ok to use outflow boundary condition for multiphase flow, with air coming thru nozzle? outflow can't be used when density is varying in unstaedy calculations..now if pressure is changing inside the capillary, then density can vary. Under this case, wat should be outlet boundary condition?

Neil June 21, 2007 08:23

Re: outflow boundary condition for multiphase flow
 
use a pressure outlet. If M<0.3 you can assume the flow is incompressible and use the pressure based solver, if not use the density based solver.


All times are GMT -4. The time now is 06:26.