CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   .cas settings copy (http://www.cfd-online.com/Forums/fluent/45252-cas-settings-copy.html)

alex July 3, 2007 15:24

.cas settings copy
 
Hi,

is it possible to copy boundary conditions, solver settings, models, fluid properties,etc. (in other words all settings), from one case to a new one which is the same as before but has finer mesh?

Thanks

bashu July 3, 2007 18:44

Re: .cas settings copy
 
use

file write-bc "fname.bc"

to write and read back with

file read-bc "fname.bc"

Tomasz Bednarz July 3, 2007 18:56

Re: .cas settings copy
 
alternatively you can prepare journal to start the case and read your courser mesh

red lemon July 15, 2007 17:04

Re: .cas settings copy
 
You can also use interpolate feature to import your data from a coarse to a fine mesh to avoid having to reinitialise a solution and start from a closer solution.


All times are GMT -4. The time now is 14:02.