CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

GAMBIT - warn about geometric tolerance

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 6, 2007, 17:32
Default GAMBIT - warn about geometric tolerance
  #1
CFDNewbie
Guest
 
Posts: n/a
I have a problem with meshing an airfoil in GAMBIT, I use a very fine mesh of order 1e-06 at the wall for obtaining an y+ = 1. The error :

WARN: Mesh size on face.2 is smaller than the geometric tolerance. For an accurate mesh use larger mesh sizes and/or create geometry at a larger scale.

Thanks for your help.
  Reply With Quote

Old   July 7, 2007, 00:49
Default Re: GAMBIT - warn about geometric tolerance
  #2
AJ
Guest
 
Posts: n/a
Could you model the geometry in mm or smaller dimensions or change the tolerance?
  Reply With Quote

Old   July 7, 2007, 10:48
Default Re: GAMBIT - warn about geometric tolerance
  #3
CfdNewbie
Guest
 
Posts: n/a
I could try using mm ... it should work with a 1e-03 smallest cell height. Thanks.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Errors during exporting from Gambit to Fluent redrum FLUENT 3 August 6, 2014 23:40
[GAMBIT] gambit global geometric tolerance alireza2475 ANSYS Meshing & Geometry 1 July 19, 2010 02:23
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 13:39
Tolerance in GAMBIT Help!!!!!! Lottar FLUENT 0 October 6, 2008 15:03
How to update polyPatchbs localPoints liu OpenFOAM Running, Solving & CFD 6 December 30, 2005 18:27


All times are GMT -4. The time now is 06:17.