CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

coating

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 9, 2007, 15:44
Default coating
  #1
nick
Guest
 
Posts: n/a
Hi,

I'm trying to mesh two thin solid layers (coating) around a blade. I tried to model the two thin solid volumes and mesh them, but without success. On the other hand I can create a uniform hex b.l. mesh around the blade as part of the flow domain, so I was thinking is it possible to define two portions (layers) of that b.l. mesh as solid? Thanks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fluent doesnt read 1D coating mesh - advice needed FuzzyDice FLUENT 5 September 28, 2011 16:34
the volatilization after coating the paint Jay FLUENT 1 March 2, 2005 04:36
spin coating JH FLUENT 0 July 23, 2004 20:32
Modelling of Filter paper and paint coating Karthick FLUENT 0 June 8, 2004 07:14
Modelling of Filter paper and paint coating Karthick FLUENT 0 June 2, 2004 06:20


All times are GMT -4. The time now is 13:15.