CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Importing FAN B.C. from Gambit to Fluent (http://www.cfd-online.com/Forums/fluent/45333-importing-fan-b-c-gambit-fluent.html)

Peter July 10, 2007 16:00

Importing FAN B.C. from Gambit to Fluent
 
I am attempting to use Fluent's prepackaged fan paramatitzation.

The geometry is modeled, and the boundary conditions and zones are defined in gambit.

When I go to import the mesh file into Fluent, the fan(infinitely thin disk) is absent.

Any suggestions?

Thanks.

Versions: Gambit 2.3 Fluent 6.3


red lemon July 10, 2007 17:07

Re: Importing FAN B.C. from Gambit to Fluent
 
Try labelling as an interior in Gambit then changing to fan model in Fluent. NB Gambit 2.4 is now available.


All times are GMT -4. The time now is 20:25.