CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

writing UDF for modelig mass transfer for VOF

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 11, 2007, 01:09
Default writing UDF for modelig mass transfer for VOF
  #1
ardalan soleymani
Guest
 
Posts: n/a
hi every body I'm trying to model mass transfer between water and a gas mixture which is rich of water vapor(I call it air-water) in a tank. air-water comes through tank interior and pressurize the water which is drained through the tank exterior. I think the best model for modeling this problem is using the VOF multiphase model. VOF multiphase model dosen't account the heat and mass transfer between phases by default, and user needs to use UDF for modeling these processes. if any body have an experience in writing UDF for modeling heat and mass tansfer in VOF multiphase model or other useful advisements plesase tell me about it.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF for transient pressure inlet, mass flow check at nozzle exit and volumetric heat kokoory FLUENT 0 August 17, 2011 02:07
Hooking a DPM Particle Heat and Mass Transfer UDF to FLUENT subhankar_bhandari FLUENT 0 August 19, 2010 03:01
UDF for mass transfer through a boundary (mt-sofc case) vlawlor Fluent UDF and Scheme Programming 4 November 9, 2009 08:31
UDF solution variable for time-averaged mass frac? A. S. FLUENT 0 May 14, 2007 16:44
Writing PDE BC for mass fraction in UDF?? KKLAU FLUENT 2 April 7, 2004 05:54


All times are GMT -4. The time now is 16:08.