CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Please Help!!

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 12, 2007, 14:43
Default Please Help!!
Posts: n/a
Dear all,

I have a cubic geometry in which there is wet coal initially (coal + water).There is a enegry source at the bottom face of the cube which is heating it up.Due to this, the water gets evaporated and the wet coal is converted to dry coal(coal) while the steam formed it set out through an outflow pipe. Someone please tell me how to do this in fluent!

Do we need to have species transport enabled and treat this evaaporation as a reaction? If so, what all parameters are required? Wht abt treating it as an equilibrium reaction?

Do we need multiphase too...I have a solid, liquid and steam (gas)??

Thanks in advance, Arpit
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 07:07.