CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Two-sided Walls (http://www.cfd-online.com/Forums/fluent/45385-two-sided-walls.html)

Jayant July 13, 2007 08:42

Two-sided Walls
 
Plzzz help I am new and want to specify a particular wall which is inside the domain as two sided meaning the fluid being on both sides of the wall

workng in fluent 6.2.16 plz help thnx n advance

Naghman Khan July 13, 2007 10:56

Re: Two-sided Walls
 
You just need to set the boundary condition to wall in Gambit then in Fluent when setting Boundary Conditions go to the wall menu and you should find 'coupled' as an option. If you select this it will make the wall 2 sided and apply same conditions to both. I have done a similar thing. When you select coupled you do not need to explicitly enter in any more infor although you could define a wall thinckness and change material type to suit your needs. You don't have to enter anything for heat generation option



All times are GMT -4. The time now is 01:23.