CFD Online Logo CFD Online URL
Home > Forums > FLUENT


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 23, 2007, 11:17
Posts: n/a
Hello, I am runniing a DPM simulation for tracking particles injected at inlet of a domain. The particels escape if they hit any of the domain boundaries except at outlet where they are trapped. This is a transient simulation I am interested in calculating the Mass Flow Rate of the droplets, or in other words the Rate of Change of DPM Concentration on the outlet boundary.

I tried the Report -> Surface Integrals -> Mass Flow Rate ->DPM Concentration

But the value is comming zero if a select the outlet face as it is a line (Domain is 2D). For Default Interior it is evaluating the Mass Flow Rate

Can anyone help me with calculating the DPM Flux per unit time on the outlet boundary?

Thank You Sandilya
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ansys Post processing ano999 ANSYS 1 May 27, 2011 16:24
NO model vs post processing in coal combustion,CFX sakalido CFX 1 April 15, 2011 14:07
post processing for KIVA dirga Main CFD Forum 5 April 23, 2009 10:58
Tecplot for CFX post processing pantangi goud CFX 2 August 24, 2005 16:42
Post Processing in FEM Abhijit Tilak Main CFD Forum 0 April 26, 2004 11:59

All times are GMT -4. The time now is 21:58.