CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

HOMOGENEOUS TWO PHASE FLOW IN A PIPE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 25, 2007, 15:38
Default HOMOGENEOUS TWO PHASE FLOW IN A PIPE
  #1
beginner
Guest
 
Posts: n/a
Hello everybody

I would like to get the drop pressure in a vertical boiling pipe.

I am looking for somebody capable to explain me the link between the BLASIUS Law for friction in homogeneous (blubby flow) two phase flow in pipe and the drag coeficient NAUMANN which is proposed in fluent. Is it possible to get some data with fluent??? which model, parameters...

Conserning heterogeous (slug) i would like to know if somebody have already got some result considering some corelation as MARTINELLI NELSON ou FRIEDEL? May be with UDF.

Sorry i am just a beginner, hoping that my question will interest you.

Bye bb

  Reply With Quote

Old   July 26, 2007, 04:20
Default Re: HOMOGENEOUS TWO PHASE FLOW IN A PIPE
  #2
K.Baker
Guest
 
Posts: n/a
The Blasius law is very simple law to estimate the friction factors in the pipes from Rynolds number and there is different laws for it in laminar turbulent flow,smooth rough pipes...etc In FLUENT we not in need for it because the friction factors can be estimated directly from the shear stresses from the relation f(friction factor)=shear stress/(2*density*velocity^2)I am not sure If i wrote this relation correctly you can check it from any CFD book. So you can get the data from FLUENT? My interest also in two phase flow but I am studying stratified flow not bubbly so do you have an idea about the relations of predicting the pressure drop in two phase flow in general. Hope this helpful for you too.

K.Baker

  Reply With Quote

Old   July 27, 2007, 12:17
Default Re: HOMOGENEOUS TWO PHASE FLOW IN A PIPE
  #3
beginner
Guest
 
Posts: n/a
Hi sorry but i am would take to homogeneous two phase flow.

I have still some problem and now i come back to simple phase to simple phase flow. I don't get the roughness height i try to compare with MOODY diagramme.

If you have any information about this. I Would be very grateful

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas-liquid 2 phase flow in microchannels using VoF LyngHoo FLUENT 1 November 13, 2012 20:01
[GAMBIT] meshing in GAMBIT, a flow through a pipe having complex inflow geometry mazhar1613 ANSYS Meshing & Geometry 1 January 12, 2012 00:18
pulsating static pressure around zero at pipe flow David Kim FLUENT 0 May 16, 2006 13:47
outlet boudary condition for a flow in the pipe Atit CFX 2 November 9, 2004 18:43
compressible two phase flow in CFX4.4 youngan CFX 0 July 1, 2003 23:32


All times are GMT -4. The time now is 04:59.