CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

plotting on the edge of a face

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 26, 2007, 06:12
Default plotting on the edge of a face
  #1
Muhammad Usman Qureshi
Guest
 
Posts: n/a
Hello,

I have specified a face in Gambit as 'wall'. I want to plot static pressure at one of the edges. How can i do it in Fluent. The face constitutes part of a volume.

Thank you.
  Reply With Quote

Old   July 26, 2007, 17:33
Default Re: plotting on the edge of a face
  #2
AAA
Guest
 
Posts: n/a
Hey

First, You have to know the coordinates (x, y, z) of the two verices (end points) of that edge. You can get them from Gambit (there are other ways to specify a line (check the manual), but I find this the easiest). Then, in Fluent, Go to "Line/Rake" and insert the coordinates of the two end points. If you want the pressure values at the center of each cell, choose line (they might not be equally speced though if your grid is not uniform in that direction), or choose rake and specify the number of data points you want (they will be equally spaced). Then go to "plot", "xy plot, and choose Pressure for the y function and your line/rake for the x function.

Good Luck

AAA
  Reply With Quote

Old   July 27, 2007, 05:18
Default Re: plotting on the edge of a face
  #3
Muhammad Usman Qureshi
Guest
 
Posts: n/a
HI,

Thank you for your help. Will this method work for a curved edge as well.

Thanks,

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
BlockMeshmergePatchPairs hjasak OpenFOAM Native Meshers: blockMesh 11 August 15, 2008 07:36
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00


All times are GMT -4. The time now is 13:38.