CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

gambit *.NEU* file in write a cfd code

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 27, 2007, 06:11
Default gambit *.NEU* file in write a cfd code
  #1
abbas
Guest
 
Posts: n/a
hi all. i want write a cfd code. i want to bring mesh geometry of a software that can produce mesh . please tell me that can gambit *.NEU* file help me? if no please help me. thanks alot.
  Reply With Quote

Old   July 27, 2007, 07:02
Default Re: gambit *.NEU* file in write a cfd code
  #2
Joe
Guest
 
Posts: n/a
www.openfoam.org
  Reply With Quote

Old   July 27, 2007, 07:48
Default Re: gambit *.NEU* file in write a cfd code *NM*
  #3
abbas
Guest
 
Posts: n/a
  Reply With Quote

Old   July 28, 2007, 08:00
Default Re: gambit *.NEU* file in write a cfd code
  #4
CFD_Newbie
Guest
 
Posts: n/a
Yes, you could use the Gambit neutral file for your CFD code with a few extra works.

You have in the neutral file:

- a list of vertex coordinates;

- a list of nodes defining a cell;

- the nodes that defining your boundary.

In principle you need to generate a list edges/faces from the Gambit output.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
swak4foam building problem GGerber OpenFOAM Installation 54 April 24, 2015 16:02
GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh gschaider OpenFOAM 300 October 29, 2014 19:00
pisoFoam compiling error with OF 1.7.1 on MAC OSX Greg Givogue OpenFOAM Programming & Development 3 March 4, 2011 18:18
Regarding FoamX running Kindly help out hariya03 OpenFOAM Pre-Processing 0 April 18, 2008 04:26
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00


All times are GMT -4. The time now is 19:54.