CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Divergence on AMG solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 9, 2007, 05:34
Default Divergence on AMG solver
  #1
maxime
Guest
 
Posts: n/a
Hi!

I am trying to perform a coupled calculation (fluid and energy)on a quite difficult geometry. After a few iterations, I get an error message : "Divergence on AMG solver : temperature". When I look to the contours of temperature, there is just a point where the temperature is very high. However when I check the mesh at this point, th e surounding cells are quite good. Does anyone know what is this problem and how I can deal with it? thank you

Maxime
  Reply With Quote

Old   August 9, 2007, 07:21
Default Re: Divergence on AMG solver
  #2
Joe
Guest
 
Posts: n/a
Try to usual things. Play with under relaxation factors, time step size etc. AMD solver settings can be fiddled with as a last resort.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error: Divergence detected in AMG solver: species-0 -> Increasing relaxation sweeps ksiegs2 FLUENT 2 June 18, 2012 11:26
Divergence detected in AMG & FMG solver..... devesh.baghel FLUENT 1 January 17, 2011 02:58
Error: Divergence detected in AMG solver siri FLUENT 3 October 21, 2010 14:34
Divergence detected AMG solver error Rub Nawaz Khalid FLUENT 2 August 14, 2010 11:01
divergence in AMG solver Aly FLUENT 1 November 11, 2004 14:00


All times are GMT -4. The time now is 01:53.