CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Swept Wing Meshing in Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 12, 2007, 00:39
Default Swept Wing Meshing in Gambit
  #1
nick
Guest
 
Posts: n/a
Hi, i am trying to create meashes for wings at different angles of attack in increments of 10 degrees.

For 0 and 10 degree sweep i had not difficulty in just sweeping my 2d mesh, then using intervals to fill in separate the volume using the 2d mesh as my base mesh.

Now though when i got to 20 degree sweep, it is erroring during the sweep comand and telling me i can not use a cooper mesh to mesh this,

Anyone got any ideas on what i need to do??
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Forward swept wing simulation abid CD-adapco 1 June 16, 2012 13:26
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing David-CFD ANSYS Meshing & Geometry 1 April 1, 2011 05:22
Meshing for 3D wing with tubercle on the leading edge in GAMBIT nvtrieu FLUENT 0 August 14, 2010 10:13
[ICEM] Problems about meshing the swept wing with cylinder end cap kepeng ANSYS Meshing & Geometry 3 June 15, 2010 05:21
[GAMBIT] Desperate student needs help meshing 3D GAMBIT model - please help! lau06165 ANSYS Meshing & Geometry 1 March 22, 2010 02:09


All times are GMT -4. The time now is 05:38.